Ironbeam PickMyTrade: API Setup and First-Order Checks

An Ironbeam PickMyTrade connection needs approved broker API access, the correct Demo or Live environment and a verified destination account. After connecting, generate the current Ironbeam-specific alert configuration and follow one event through TradingView, PickMyTrade and the broker. A green connection indicator alone does not establish that an order filled or that protection is working.

Start with access eligibility before entering credentials. A platform demo login and simulation API access are different things. This guide explains the current prerequisite, the documented connection workflow and a practical first-order checklist for pickmytrade.io. It does not assume that an old JSON example or an existing TradingView broker-panel login configures the webhook route for you.

Key takeaways

• Confirm Ironbeam API eligibility before requesting a key.
• Match the requested API environment to the PickMyTrade connection.
• Keep broker credentials separate from the PickMyTrade webhook token.
• Generate the message for the intended account and signal source.
• Verify broker orders, fills, exits and remaining positions before expanding the setup.

What API access does your Ironbeam PickMyTrade setup need?

Ironbeam’s current API Access policy states that a live funded account with at least $1,000 is required, including for simulation API access. Paper-only or unfunded accounts do not qualify under that published policy. Check the official Ironbeam API Access requirements before treating a demo registration as sufficient authorization.

The same page describes activity-based access tiers and separate simulation data arrangements. As checked on November 4, 2026, it lists a five-contract monthly threshold for its no-additional-charge API tier and ten-minute-delayed simulation data by default. Confirm the tier, trading permissions and data entitlement applicable to your intended integration directly with Ironbeam.

Do not assume a development or read-only arrangement authorizes automated order placement. Ask specifically whether your approved access permits trading in the environment you plan to connect. Confirm any ongoing API or market-data charges before proceeding; a PickMyTrade subscription does not itself establish your broker entitlements.

PickMyTrade’s connection guide describes requesting a key for Demo/Simulated Trading or Live Trading. Those environment choices do not override Ironbeam’s eligibility policy. If the request form, a tutorial and your account status appear inconsistent, resolve the account-specific access question with Ironbeam rather than testing alternative credentials at random.

Step 1: request the correct Ironbeam API access

Use the official Ironbeam API page and its current request process. Identify the environment and explain that you intend to connect your account to PickMyTrade for TradingView-driven futures automation. Provide accurate account information and wait for confirmation that the necessary access is enabled.

Before submitting, record the intended environment and account. Ask whether the issued credentials cover that account, whether order placement is authorized and what data is available for testing. Keep the response so you can distinguish an unapproved connection from a configuration error later.

Avoid building your setup schedule around an approval estimate in an older tutorial. Provisioning depends on the actual request and account authorization. If approval is pending, ask Ironbeam about its status through the official support route. A key request and an issued, authorized key are different milestones.

Step 2: create the Ironbeam connection in PickMyTrade

The PickMyTrade Ironbeam connection guide documents selecting Ironbeam from the broker menu, opening Add New Connection and entering Environment, Username, API Key and Password. Follow the current interface if labels differ, and confirm the destination account after creating the connection.

1. Open the official PickMyTrade.io application and select Ironbeam.
2. Choose Add New Connection.
3. Select the Demo or Live environment appropriate to your approved access.
4. Enter your Ironbeam username, password and issued API key in their respective fields.
5. Select Create and inspect the connection result.
6. Confirm that the expected account is available for the intended route.

The guide describes a green indicator as successful connection. Use that as the start of verification, then inspect the account and order workflow. If an unexpected account appears or the intended destination is absent, resolve that discrepancy before sending an entry.

Enter credentials only in the official connection workflow. Do not paste working credentials into a public forum, shared screenshot or online JSON validator. The Ironbeam API key authorizes broker access; the PickMyTrade token used in alert configuration serves a separate purpose. They are not interchangeable.

Step 3: verify Demo versus Live before generating an alert

Check the environment at both ends: the broker access you received and the connection selected in PickMyTrade. The fact that a chart uses a backtested strategy does not make the broker destination simulated. Write down the account identifier and environment together so the first test has an unambiguous destination.

Use Demo for initial routing checks only after confirming authorized API access. Ironbeam’s demo information warns that simulated results may differ from live execution and that its demo does not reflect live commissions and fees. Check your API data entitlement separately from the platform demo description.

If TradingView and the simulation feed use different data timing, an apparent price mismatch may need that context. Record each source and its timing before comparing fills. A successful test can establish that instructions reached the selected account; it cannot guarantee a future live fill price or execution time.

Step 4: generate the current Ironbeam alert configuration

Use the broker-specific generator and match the signal source, account, instrument, quantity and exit method. PickMyTrade’s Ironbeam indicator automation guide explains the webhook-based route for indicator signals. For a strategy, use the dedicated Ironbeam strategy guide linked from the documentation hub.

Do not reuse a payload generated for another broker or account without checking every destination-dependent field. Compare the TradingView chart symbol with the executable futures contract. Confirm that quantity is interpreted as intended and that any multiplier or sizing setting does not change the result unexpectedly.

Decide how the position will close before enabling the entry. If exits depend on later alerts, include those events in the test. If the selected configuration attaches protective orders, verify those orders at the broker. Do not assume that every stop, target or partial-exit arrangement is supported in every alert mode.

Copy the generated webhook URL and message into the matching TradingView alert. Inspect the saved running alert, not just the draft in the generator. Keep a record of which alert uses which connection and account, especially if you maintain both testing and live routes.

Step 5: check the first order from signal to broker

Follow one controlled real-time event through all three systems. The checklist below is a recommended verification method, not a claim that every interface uses the same status labels. Record the event time and time zone so an application entry can be matched to the correct broker order.

1. Confirm the intended TradingView alert triggered and inspect the resolved message.
2. Locate the matching PickMyTrade record and read its result or exact error.
3. Find the corresponding Ironbeam order in the intended account and environment.
4. Compare contract, action, quantity, order type and any specified price.
5. Inspect the order status and execution details, including any partial fill.
6. Verify the resulting position and the intended exit or protective orders.
7. After closing, check the remaining position and working orders.

An accepted order and a filled order are different outcomes. A working limit order may still be waiting for its price condition. A rejected order needs its rejection reason investigated. A filled entry with a missing or rejected stop needs a protection check rather than a new entry signal.

If a request times out or its outcome is unclear, inspect broker orders and positions before replaying it. An absent response does not prove that the order was never placed. Repeating an uncertain request can create another order if the first submission already succeeded.

What should you check when the Ironbeam connection or order fails?

Identify the earliest stage with missing or contradictory evidence. Authentication failure, missing webhook delivery, rejected order instructions and an unfilled working order require different investigations. Preserve the exact error and the time it occurred before changing settings, then make one relevant correction at a time.

• Connection fails: confirm approved API access, environment and credentials.
• Expected account is absent: confirm the login and authorization for that destination.
• No TradingView event appears: inspect the alert condition and running state.
• TradingView triggers but no application record appears: inspect webhook configuration and delivery information.
• PickMyTrade or the broker reports an error: investigate the exact recorded reason.
• Order exists but is not filled: inspect status, price conditions, session and remaining quantity.

Do not treat every execution issue as a bad API key. If an order reached Ironbeam and was rejected for an instruction or account restriction, use that evidence. If there is a working order, establish its state before reconnecting or sending another entry.

For support, provide the environment, relevant account reference, contract, event time with time zone, application reference and broker order ID where available. Share exact error text through official private support. Remove passwords, API keys and webhook tokens from screenshots and exported messages.

Does Ironbeam automation require a VPS or an open computer?

PickMyTrade describes its Ironbeam integration as cloud-hosted, without a required local desktop app or VPS for that route. That architecture does not guarantee uninterrupted access or execution. Keep a practical way to inspect the broker account and manage positions when automation is active.

Before leaving a setup unattended, verify entry and exit behavior and know how you will respond to an unexpected position. Stopping future alerts is not evidence that existing positions are closed or pending orders canceled. Inspect the broker state whenever changing or pausing the route.

Frequently asked questions

Complete the connection with an order check

A working Ironbeam PickMyTrade setup combines approved access, a deliberate environment choice and a verified order lifecycle. Use the current connection guide alongside your account, confirm the destination and follow the first entry through its exit. Expand automation only after you can explain the broker orders and positions it creates.

Disclaimer:
This content is for informational purposes only and does not constitute financial, investment, or trading advice. Trading and investing in financial markets involve risk, and it is possible to lose some or all of your capital. Always perform your own research and consult with a licensed financial advisor before making any trading decisions. The mention of any proprietary trading firms, brokers, does not constitute an endorsement or partnership. Ensure you understand all terms, conditions, and compliance requirements of the firms and platforms you use.

Also Checkout: Stop Automated Trading in PickMyTrade: Pause Guide